Diagnostic trouble code
P0717
Powertrain
Unverified
Powertrain (P)
Transmission
Input shaft speed sensor no signal
No input speed signal is received.
What P0717 means
No input speed signal is received.
Symptoms you may notice
- Harsh shifts
- Limp mode
Possible causes
- Faulty sensor
- Open wiring
- Damaged ring
Causes are listed from most to least likely for this code. Confirm the actual cause with the diagnostic checks before replacing parts.
Checks to run
- Test the sensor
- Check wiring
- Inspect the ring
Tools you may need
Multimeter
Related codes
More Transmission codes →
P0700
Transmission control system malfunction
P0705
Transmission range sensor (PRNDL) circuit malfunction
P0706
Transmission range sensor range / performance
P0715
Input shaft / turbine speed sensor circuit malfunction
P0716
Input shaft speed sensor range / performance
P0720
Output shaft speed sensor circuit malfunction
Verification and editorial notes
UnverifiedThis page has not been technically verified yet. Confirm the diagnosis and measurements in the workshop manual for your vehicle.
Diagnose before replacing. A diagnostic trouble code identifies the circuit or
system the control unit flagged. It does not prove that a particular part has failed. Confirm
the cause with the measurements and checks above, and follow the workshop manual for your exact
engine before replacing parts or clearing codes.