Diagnostic trouble code
P0705
Powertrain
Unverified
Powertrain (P)
Transmission
Transmission range sensor (PRNDL) circuit malfunction
The transmission position sensor signal does not match the lever position.
What P0705 means
The transmission position sensor signal does not match the lever position.
Symptoms you may notice
- Gear position wrong on the cluster
- No start in P/N
- Limp mode
Possible causes
- Faulty range sensor
- Misadjusted linkage
- Wiring fault
Causes are listed from most to least likely for this code. Confirm the actual cause with the diagnostic checks before replacing parts.
Checks to run
- Verify range sensor readings per gear
- Adjust linkage
- Test wiring
Tools you may need
OBD-II scanner
Multimeter
Related codes
More Transmission codes →
P0700
Transmission control system malfunction
P0706
Transmission range sensor range / performance
P0715
Input shaft / turbine speed sensor circuit malfunction
P0716
Input shaft speed sensor range / performance
P0717
Input shaft speed sensor no signal
P0720
Output shaft speed sensor circuit malfunction
Verification and editorial notes
UnverifiedThis page has not been technically verified yet. Confirm the diagnosis and measurements in the workshop manual for your vehicle.
Diagnose before replacing. A diagnostic trouble code identifies the circuit or
system the control unit flagged. It does not prove that a particular part has failed. Confirm
the cause with the measurements and checks above, and follow the workshop manual for your exact
engine before replacing parts or clearing codes.