You are offline — AutoTools still works from your device.
Diagnostic trouble code P0341 Powertrain
Unverified Powertrain (P) Ignition / Camshaft

Camshaft position sensor range / performance problem

The camshaft signal is out of pattern relative to the crankshaft.

Search another code

Updated
Views
50

What P0341 means

The camshaft signal is out of pattern relative to the crankshaft.

Symptoms you may notice

  • Check engine light
  • Poor power
  • Hard start

Possible causes

  1. Faulty cam sensor
  2. Timing belt/chain wear
  3. Wrong sensor gap

Causes are listed from most to least likely for this code. Confirm the actual cause with the diagnostic checks before replacing parts.

Checks to run

  1. Scope the cam signal
  2. Verify timing marks
  3. Test wiring

Tools you may need

Oscilloscope Multimeter

Verification and editorial notes

Unverified
Verification status
Unverified
Editorial status
Published
Published
Last updated
Translations
Français, العربية

This page has not been technically verified yet. Confirm the diagnosis and measurements in the workshop manual for your vehicle.

Diagnose before replacing. A diagnostic trouble code identifies the circuit or system the control unit flagged. It does not prove that a particular part has failed. Confirm the cause with the measurements and checks above, and follow the workshop manual for your exact engine before replacing parts or clearing codes.

Keep diagnosing

Advertisement
Install AutoToolsWorks offline, one tap away.
Ad
Ask the AI mechanic
Hi! Ask me anything about your car — codes, noises, parts, maintenance.
All tools